11ENGLISH142 3RLSPEAKER SYSTEMS6 16 R LR L IMPEDANCECENTER SURRFRONTY CB CRAMFM COAX. 75LOOPANT.(4) Connecting the antenna terminalsDIRECTION OFBROADCASTINGSTATION75 Ω/ohmsCOAXIALCABLEFM ANTENNAFM INDOORANTENNA(Supplied)AM LOOPANTENNA(Supplied)AM OUTDOORANTENNA GROUNDAM loop antenna assemblyConnect to the AMantenna terminals.Remove the vinyl tieand take out theconnection line.Bend in the reversedirection.a. With the antennaon top any stablesurface.b. With the antennaattached to a wall.MountInstallation holeMount on wall, etc.Connection of AM antennas1. Push the lever. 2. Insert the conductor. 3. Return the lever.Note to CATV system installer:This reminder is provided to call the CATV system installer’sattention to Article 820-40 of the NEC which provides guidelinesfor proper grounding and, in particular, specifies that the cableground shall be connected to the grounding system of thebuilding, as close to the point of cable entry as practical.Notes:• Do not connect two FM antennas simultaneously.• Even if an external AM antenna is used, do not disconnect theAM loop antenna.• Make sure AM loop antenna lead terminals do not touch metalparts of the panel.FM ANTENNAADAPTER(Supplied)• An F-type FM antenna cable plug can be connected directly.• If the FM antenna cable’s plug is not of the F-type, connect using the included antenna adapter.14mm9mm14mm19mm5mm5mm5C-2V3C-2V5C-2VFM antenna adopter assembly75 Ω/ohms COAXIAL CABLEOpen the coverANTENNA ADAPTERREMOVECLAMPCLAMPCLAMPCLAMPPULLPULLSHUTSHUT