Denon ADV-700 Operating Instructions Manual

Also see for ADV-700: Brochure & specs Operating instructions Operating instructions Service manual Service manual

ENGLISH54• The ADV-700 is equipped with an on-screen display (“OSD”) function that displays various types of information on the surround functions andthe disc on the screen when the function is set to DVD.q Setup screen• This is used to select the speaker system being used (quick system setting) and to change the function of the ADV-700 and various settingswhen playing discs (system setting change and DVD setting change).• The setup screen can be used regardless of the currently set function, but it cannot be operated while a disc is playing. Set the stop modefirst.w Display of disc information• When the function is set to DVD, the OSD displays information on the disc and appears when various playback functions are operated.e Display of surround function• When the function is set to DVD, information on the surround amplifier is also displayed and can be operated.• The OSD for the surround function (AV OSD) can be turned on and off.(The OSD for the setup screen and DVD disc information cannot be set to “OFF”.) Set to “ON” upon shipment from the factory.✽ Set to “ON” upon shipment from the factory.17 ON-SCREEN DISPLAY1c 8 1:02:46DVD TONE1 2VOLUMEENTERBANDMODEMENU FUNCTIONDISPLAY RETURN INPUT MODE SURROUNDTOP MENUSETUPSDB/TONEMUTESURR.PARASUB TITLE ANGLEAUDIOSHIFTCH.SELECTCHT.TONETUPROG/DIRECT REPEAT A-B REPEAT RANDOMDVDTV/VCRCHVOLSLEEPONOFFREMOCON MODE2 34 5 68 9CLEARCALL 0+1071STATUSCDR/MD/TAPE TUNER/TV/VCRVCR POWERVCR POWERTV POWERTV POWERTVVCRNTSC/PALMEMOPOWERPOWERCHCHCH1221 With the function set to DVD, press the STATUS button for atleast 2 seconds.• “AV OSD ON 0:1 OFF” is displayed.STATUSSTATUSRemote control unit Remote control unit✽ The current setting is displayed in green.2 Turn the AV OSD on or off.FUNCTION/SELECTMain unit Remote control unitor :ONor :OFF✽ After several seconds, the display turns off and the setting is made.NOTES:• Depending on the disc being played, the picture may bedisturbed when the OSD turns on. This is not a malfunction.If this should happen, set the AV OSD to “OFF”.• The OSD is also output to the VCR video output terminals.Do not perform setup or OSD operations while recording with avideo deck.