Denon ADV-700 Operating Instructions Manual

Also see for ADV-700: Brochure & specs Operating instructions Operating instructions Service manual Service manual

19ENGLISH(3) Preset memory1 While pressing the CDR/MD/TAPE remote control modeselector button, input the 3-digit number (“000”, “111” and“222”) corresponding to the device you want to preset (CDR,MD or TAPE), referring to the table below.• Release the CDR/MD/TAPE button after inputting threedigits. This completes the presetting operation.[1] Audio Component• The signals of your other Denon products can be stored in theincluded remote control unit’s preset memory to operate either theCDR, MD or TAPE function.Operation is not possible for some models.Table 1: Combinations of Personal System CodesInput the 3-digit number while pressing CDR/MD/TAPE.CDR/MD/TAPE012012012CDRMDTAPEThis is set to CDR by factory default.NOTE:• Only one device (CDR, MD or TAPE) can be stored in the presetmemory.1 Press the CALL button while pressing the TUNER/TV/VCRremote control mode selector button, then input the three-digit number corresponding to the code of the manufacturerof the TV whose signals you want to store, referring to theincluded list of remote control unit codes.• Release the TUNER/TV/VCR button after inputting threedigits. This completes the presetting operation.Example: To preset to “Hitachi 074”[2] TV• Other makes of components can be operated by setting the presetmemory for your make of TV.This remote control unit can be used to operate components ofother manufacturers without using the learning function byregistering the manufacturer of the components as shown on theList of Preset Codes (attached sheet).Operation is not possible for some models.Press the buttons below while pressing TUNER/TV/VCR.TUNER/TV/VCRCALLTV POWERTV POWER0 7 4HITACHI“074”This is set to “Hitachi 074” by factory default.NOTE:• Preset codes set upon shipment from the factory and whenreset.VOLUMEENTERBANDMODEMENU FUNCTIONDISPLAY RETURN INPUT MODE SURROUNDTOP MENUSETUPSDB/TONEMUTESURR.PARASUB TITLE ANGLEAUDIOSHIFTCH.SELECTCHT.TONETUPROG/DIRECT REPEAT A-B REPEAT RANDOMDVDTV/VCRCHVOLSLEEPONOFFREMOCON MODE2 34 5 68 9CLEARCALL 0+1071STATUSCDR/MD/TAPE TUNER/TV/VCRVCR POWERVCR POWERTV POWERTV POWERTVVCRNTSC/PALMEMOPOWERPOWERCHCHCH11VOLUMEENTERBANDMODEMENU FUNCTIONDISPLAY RETURN INPUT MODE SURROUNDTOP MENUSETUPSDB/TONEMUTESURR.PARASUB TITLE ANGLEAUDIOSHIFTCH.SELECTCHT.TONETUPROG/DIRECT REPEAT A-B REPEAT RANDOMDVDTV/VCRCHVOLSLEEPONOFFREMOCON MODE2 34 5 68 9CLEARCALL 0+1071STATUSCDR/MD/TAPE TUNER/TV/VCRVCR POWERVCR POWERTV POWERTV POWERTVVCRNTSC/PALMEMOPOWERPOWERCHCHCH111