Denon ADV-700 Operating Instructions Manual

Also see for ADV-700: Brochure & specs Operating instructions Operating instructions Service manual Service manual

Video input/output connections:• Connect the video deck’s video output jack (VIDEO OUT) to the (yellow) VCR IN jack, andthe video deck’s video input jack (VIDEO IN) to the (yellow) VCR OUT jack using 75Ω/ohms video coaxial pin plug cords.Connecting the audio output jacks• Connect the video deck’s audio output jacks (AUDIO OUT) to the VCR IN jacks, and thevideo deck’s audio input jacks (AUDIO IN) to the VCR OUT jacks using pin plug cords.AUDIOAUDIOVIDEOVIDEOMONITOR OUT• Connect the TV’s videoinput jack (VIDEO INPUT) tothe MONITOROUT jack using a 75Ω/ohms video coaxial pinplug cord.VIDEO9ENGLISHVIDEOMON.OUTS VIDEOIN IN ININ OUTTV/DBS V.AUX VCRRLAUDIOIN OUT IN IN ININ OUTV.AUXTV/DBS VCRCDR/TAPEPRE OUTSUB WOOFERIN IN OUTV.AUXTV/DBS(OPTICAL)DIGITALSPEAKER SYSTEMS6 16 R LR L IMPEDANCECENTER SURROUNDFRONTMON.OUTY CB CRAMFM COAX. 75LOOPANT.VIDEOOUTAUDIOOUTLRVIDEOOUTINLROUT INLRAUDIOOUTOPTICALVIDEOOUTAUDIOOUTLR OUTOPTICALVIDEOINLRRLRLLRLR LRBBLRRL(2) Connecting video components• To connect the video signal, connect using a 75 Ω/ohms video signal cable cord. Using an improper cable can result in a drop in video quality.• When making connections, also refer to the operating instructions of the other components.TV or DBS tunerCS tunerConnecting a TV/DBS tunerTV/DBS• Connect the TV’s or DBS tuner’s videooutput jack (VIDEO OUTPUT) to the(yellow) TV/DBS IN jack using a75 Ω/ohms video coaxial pin plug cord.• Connect the TV’s or DBS tuner’s audiooutput jacks (AUDIO OUTPUT) to theTV/DBS IN jacks using pin plugcords.• For devices with optical digital outputs,connect the digital output terminal to theADV-700’s DIGITAL TV/DBS IN terminalusing an optical transmission cable.AUDIOVIDEOMonitor TV Connecting a CS tunerV.AUX• Connect the CS tuner’s video output jack (VIDEO OUTPUT) tothe (yellow) V.AUX IN jack using a 75 Ω/ohms videocoaxial pin plug cord.• Connect the CS tuner’s audio output jacks (AUDIO OUTPUT) tothe V.AUX IN jacks using pin plug cords.• For devices with optical digital outputs, connect the digitaloutput terminal to the ADV-700’s DIGITAL V.AUX. IN terminalusing an optical transmission cable.AUDIOVIDEONote on connecting the digital input jacks• Only audio signals are input to the digital input jacks.• Use optical cables for optical connections, removingthe cap before connecting.Video deckConnecting a video decks