Denon ADV-700 Operating Instructions Manual

Also see for ADV-700: Brochure & specs Operating instructions Operating instructions Service manual Service manual

This button can be pressed at any time during the system setupprocess to complete the process.30ENGLISH[4] Setting the DVD auto power off• The ADV-700 is equipped with a function that automaticallyswitches the power to standby if no operation is performed for 30minutes while in the stop mode with the function set to DVD. Here,set whether to turn this function on or off.• The factory default setting is “NO”.1 To perform these operations from places other than thesystem setting change menu, see page 26.2 At the “SYSTEM SETUP MENU”.screen, select “DVD AUTOPOWRE OFF”.and press the ENTER button.• Switch to the “DVD AUTO POWER OFF”.screen.3 Select “YES” or “NO”.• YES: The auto power off function is active when the function is setto DVD.• NO: The auto power off function does not work.4 Enter the setting.• The SYSTEM SETUP MENU reappears.[5] After completing system setup• Once the speaker settings, delay time setting and channel leveladjustments are made, there is no need to reset them unless the AVcomponents or speakers are changed or the speakers are moved todifferent positions.• Change the DVD auto power off settings as necessary.1 At the SYSTEM SETUP MENU, pressthe SETUP button.• The changed settings are entered andthe on-screen display turns off.NOTE:• If the quick system settings are selected after setting up thesystem using the system setting change menu, the speaker anddelay time settings are changed to the values preset for the quicksystem settings.BFINISH: ENTER BUTTOND V D A U T O P O W E R O F FSEL ECT :Y E SY E S NONO( D V D F U N C T I O N O N L Y )( D V D F U N C T I O N O N L Y )A U T O P O W E R O F FA U T O P O W E R O F FENTERSETUPENTERRemote control unit Remote control unitRemote control unitRemote control unit