119(2) Resetting “learned” buttons12Press the power ON button and the OFF button at the sametime.Press the “6” button to select resetting.Press the “2” button to resetting the “learned” buttons.34 The mode buttons will all light.5 Press the mode button you want to resetting, then press theENTER button.The set returns to the normal operating mode.(3) Resetting the system call buttons12Press the power ON button and the OFF button at the sametime.Press the “6” button to select resetting.Press the “3” button to resetting the system call buttons.34 All buttons of System Call will light.5 Press the button you want to resetting, then press the ENTERbutton.The set returns to the normal operating mode.(4) Resetting the punch through setting12Press the power ON button and the OFF button at the sametime.Press the “6” button to select resetting.Press the “4” button to resetting the “punch through”setting.34 All punched through mode buttons will light.5 Press the mode button you want to resetting, then press theENTER button.The set returns to the normal operating mode.(5) All reset function12Press the power ON button and the OFF button at the sametime.Press the “6” button to select resetting.Press the “+10” button to clear the entire system memory,which will restore the Remote control unit to the factorydefault settings. This operation will take approximately 20seconds. Only use this if you wish to clear all customizedsettings and memories and restore the unit to its out-of-the-box factory default settings.3
