153Remote control unit operations during multi-source playback1 Select the Zone which you want to operate using the mode selectorbuttons.RC-995471326852 Press the SOURCE ON button to turn on the Zonepower.• The multi zone power indicator on Main unit islight.Press the SOURCE OFF button to turn off theZone power.The multi zone power indicator on Main unit is off.(Remote control unit)3 Select the input source you wish to output.4 Select the input mode. (only ZONE2 mode)• Selecting the analog modePress the ANALOG button to switch to the analoginput.• Selecting the digital modePress the INPUT MODE button to switch to thedigital input.(Remote control unit)(Remote control unit)5 The volume of the outputs of the different zones canbe adjusted with the VOLUME + and – buttons onthe Remote control unit.The output level can be controlled only if the zonevolume level is set “variable” at “7-3. Volume Control” in the System Setup Menu. (See pages 101, 102)DEFAULT VOLUME SETTINGZONE2 : –40 dBZONE3 : –40 dBZONE4 : –40 dBThe Zone volume can be adjusted within the range of –80 to 18 dB, in steps of 1 dB.However, when using with ZONE2 set to multi-channel (5.1- or 7.1-channel), the ZONE2 volume can be adjustedin steps of 0.5 dB. (See pages 92~95)(Remote control unit)6 Use this to mute the audio temporarily.Press the MUTING button.The Muting level is same as set with “7-3. Volume Level”.Cancelling MUTING mode.Press the MUTING button again, or press the volume up or down buttons on the remote control.(Remote control unit)7 To combine the sound being played in ZONE2 with the desired image:Press the Remote control unit’s ZONE2 VIDEO SELECT button until the desired image appears on the ZONE2monitor out.The video source selected with the video select function is stored in the memory for the different ZONE2 inputsources.Canceling simulcast playback.Select “SOURCE” using the ZONE2 VIDEO SELECT button.(Remote control unit)Example: ZONE2(Remote control unit)(Remote control unit)8 On screen displayEach time an operation is performed, a description of that operation appears on the displayconnected to AVC-A1XV’s ZONE2 MONITOR OUT jack. Also, the unit’s operating status canbe checked during playback by pressing the Remote control unit’s ON SCREEN button.Such information as the position of the input selector and the surround parameter settings is output in sequence.For details, see page 133.(Remote control unit)
