12Connecting video components equipped with S-Video jacks• When making connections, also refer to the operating instructions of the other components.• A note on the S-Video input jacksThe input selectors for the S-Video inputs and Video inputs work in conjunction with each other.• The AVC-A1XV is equipped with a function for converting video signals. (See page 13)The signal connected to the S-Video signal terminal is output to the composite video and component video monitor out terminals.But the REC OUT terminals have no conversion function, so when recording connect the S-Video terminals.OUTS-VIDEOOUTS-VIDEOOUTS-VIDEOINS-VIDEOOUT INS-VIDEOOUT INS-VIDEOBMonitor TVVideo deck 2Video deck 1TVConnecting a monitor TVConnecting the video decksConnecting a TVMONITOR OUT• Connect the TV’s or DBS tuner’s S video input(S-VIDEO INPUT) to the MONITOROUT jack using a S jack connection cord.S-VIDEO• Connect the TV’s S video output jack (S-VIDEOOUTPUT) to the TV IN jack using an Sjack connection cord.S-VIDEO• Connect the video deck’s S output jack (S-OUT) to the VCR-1 INjack and the video deck’s S input jack (S-IN) to the VCR-1 OUT jackusing S jack connection cords.• Connect the video deck’s S output jack (S-OUT) to the VCR-2 INjack and the video deck’s S input jack (S-IN) to the VCR-2 OUT jackusing S jack connection cords.Connect the third and fourth video deck to the VCR-3 and VCR-4 jacks in thesame way.S-VIDEOS-VIDEOS-VIDEOS-VIDEOConnect the components’ audio inputs and outputs as described on page 10.NOTES:• The video signal ZONE2 MONITOR OUT (yellow), S-Videosignal ZONE2 MONITOR OUT jack or component signal ZONE2MONITOR OUT output switches together with the inputfunction selected with the ZONE2 SELECT (See page 152). Touse as the monitor output, set “SOURCE” as the ZONE2 inputfunction. The on-screen display signals are output from theZONE2 MONITOR OUT (See pages 147~149).• The video signal ZONE3 MONITOR OUT (yellow) or S-Videosignal ZONE3 MONITOR OUT output switches together withthe input function selected with the ZONE3/REC SELECT (Seepage 152). To use as the monitor output, set “SOURCE” as theZONE3/REC SELECT input function. At this time, the on-screendisplay signals are not output from the ZONE3 MONITOR OUT(See page 150).DVD player or video disc player (VDP) Connecting a DVD player or a video disc player (VDP)DVD• Connect the DVD player’s S-Video output jack to the S-VIDEO DVD IN jack using a S-Videoconnection cord.• VDP can be connected to the VDP jacks in the same way.• It is also possible to connect a video disc player, DVD player, video camcorder, game machine,etc., to the V.AUX jacks.Connecting a DBS tuner• Connect the DBS tuner’s S video output jack (S-VIDEO OUTPUT) to theDBS IN jack using an S-Video connection cord.S-VIDEODBS tuner
