100Advanced Setup – Part 11 Press the CURSOR DD or HH button to select theinput source, then press the CURSOR FF or GGbutton to select “DLINK”.2 Press the CURSOR DD or HH button to select“DLINK” setting, then press the CURSOR FF orGG button to select the input signal (ANALOG,EXT. IN or IEEE1394).If the signal cannot be played with DENON LINKconnection, the signal automatically switches to theinput from the set terminal.Setting the EXT. IN Setup• Set the method of playback of the analog input signalconnected to the EXT. IN (8CH) terminal.• Refer to “Connecting the external inputs (EXT. IN) terminals”( page 30).1 Press the CURSOR DD or HH button to select“EXT. IN Setup” at the “Audio Input Setup”menu, then press the ENTER button.• Display the “EXT. IN Setup” screen.2 Press the CURSOR DD or HH button to select theitem to be set, then press the CURSOR FF or GGbutton to select the parameter.SW Level:Sets the playback level of the analog signal thatwas input to the EXT. IN subwoofer terminal.Select according to the specifications of the playerbeing used. Also refer to the player’s operatinginstructions.+15dB (default) recommended. (0, +5, +10 and+15 can be selected.)Surr. Sp:Presets the surround speakers that are used in theEXT. IN mode.Select according to the specifications of the playerbeing used. Also refer to the player’s operatinginstructions.• Surr. A:Select when using surround speakers A.• Surr. B:Select when using surround speakers B.• Surr. A+B:Select when using both surround speakers A andB.3 Press the ENTER button to enter the setting.• The “Audio Input Setup” menu reappears.¢ Setting the DENON LINK• When a DENON DVD player and the DENON LINK havebeen connected, be sure to make a setting to “DENONLINK” with the System Setup Digital In Assignment.• When the input mode is AUTO and the signals are not beable to transferred by DENON LINK, the unit automaticallychanges over the input to the selected signals (ANALOG,EXT. IN or IEEE1394).• Refer to “DENON LINK connections” ( page 34).
