108Advanced Setup – Part 12 Press the CURSOR DD or HH button to select thesetting, then press the CURSOR FF or GG buttonto select the parameter.Analog to HDMI Convert:• ON:Setting for converting analog video signals intoHDMI signals.• OFF:Setting for not converting analog video signals intoHDMI signals.Color Space:• Y Cb Cr:The Y Cb Cr format video signals is output via theHDMI output connector.• RGB:The RGB format video signals is output via theHDMI output connector.Setting the HDMI Out Setup• Set whether to use the analog video signals to HDMIconversion function.• When using this conversion function, set the color formatand video range of the signals output from the HDMI terminal.1 Press the CURSOR DD or HH button to select“HDMI Out Setup” at the “Video Setup”menu, then press the ENTER button.• Display the “HDMI Out Setup” screen.Aspect:• FULL:The video is output while maintaining the aspectratio of the input video.This mode is suited for playing back 16:9 video.• NORMAL:A black band is added to the left and right of theinput video and the video is output.This mode is suited for playing back 4:3 video.RGB Mode Setup:• Normal:Signals are output via the HDMI output connectorwith a digital RGB video range (data range) of 16(black) to 235 (white).• Enhanced:Signals are output via the HDMI output connectorwith a digital RGB video range (data range) of 0(black) to 255 (white).When the HDMI connector is connected, the blackmay seem to stand out, depending on the TV or themonitor. In this case, set this to “Enhanced”.When “Y Cb Cr” is selected under “Color Space”,“RGB Mode Setup” will have no effect.The aspect ratio setting is valid when the resolution isset to 1080i, 720p or 1080p. To output with otherresolutions, set the aspect ratio on the TV.When “Through” is set, the signal is output with thesame resolution as input from the video, S-Video andcomponent video terminals.The OSD, however, is output with a resolution of 480i,so use a monitor compatible with this resolution.3 Press the ENTER button to enter the setting.• The “Video Setup” menu reappears.Resolution:• 480p/576p:When the video signal being input is a video, S-Videoor 480i/576i component video signal, the resolutionis converted to 480p/576p and the signal is outputfrom the HDMI MONITOR OUT terminal.• 1080i:When the video signal being input is a video, S-Videoor 480i/576i/480p/576p component video signal, theresolution is converted to 1080i and the signal isoutput from the HDMI MONITOR OUT terminal.• 720p:When the video signal being input is a video, S-Videoor 480i/576i/480p/576p component video signal, theresolution is converted to 720p and the signal isoutput from the HDMI MONITOR OUT terminal.• 1080p:The input video signal is converted to a resolution of1080p for output.• Through:The video signal being input is output as such fromthe HDMI MONITOR OUT terminal without beingconverted.
