WIDE SCREEN61Basic OperationDENON original surround modes• The AVR-4806CI is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing tosynthetically recreate the sound field. One of nine preset surround modes can be selected according to the program source andthe parameters can be adjusted according to the conditions in the listening room to achieve a more realistic, powerful sound.Surround modes and their features¢ Personal Memory PlusThis set is equipped with a personal memorize function that automatically memorizes the surround modes and input modesselected for the input different sources. When the input source is switched, the modes set for that source last time it wasused are automatically recalled.The surround parameters, tone control settings and playback level balance for the different output channels are memorized foreach surround mode.12345679SUPERSTADIUMROCK ARENAJAZZ CLUBCLASSICCONCERTMONO MOVIE(NOTE)VIDEO GAME7CH STEREOSelect this when watching baseball or soccer programs to achieve a sound as if you were actually atthe stadium. This mode provides the longest reverberation signals.Use this mode to achieve the feeling of a live concert in an arena with reflected sounds coming fromall directions.This mode creates the sound field of a live house with a low ceiling and hard walls. This mode givesjazz a very vivid realism.Select this for the sound of a concert hall rich in reverberations.Select this when watching monaural movies for a greater sense of expansion.Use this to enjoy video game sources.Select this to achieve an atmosphere like that of a movie theater with a large screen. In this mode,all signal sources are played in the 7.1-channel mode, including Dolby Surround and Dolby Digital 5.1-channel sources. Effects simulating the multi surround speakers of movie theaters are added to thesurround channels.The front left channel signals are output to the surround and surround back signal left channels, thefront right channel signals are output to the surround and surround back signal right channels, and thein-phase component of the left and right channels is output to the center channel. Use this mode toenjoy stereo sound.8 MATRIXSelect this to emphasize the sense of expansion for music sources recorded in stereo. Signalsconsisting of the difference component of the input signals (the component that provides the senseof expansion) processed for delay are output from the surround channel.Depending on the program source being played, the effect may not be very noticeable.In this case, try other surround modes, without worrying about their names, to create a sound field suited to your tastes.NOTE: When playing sources recorded in monaural, the sound will be one-sided if signals are only input to one channel (leftor right), so input signals to both channels. If you have a source component with only one audio output (monophoniccamcorder, etc.) obtain a “Y” adaptor cable to split the mono output to two outputs, and connect to the L and R inputs.
