103Advanced Setup – Part 1Setting the IEEE1394 Auto Function• Set whether or not to automatically play the IEEE1394device when it is selected with the FUNCTION knob.1 Press the CURSOR DD or HH button to select“IEEE1394 Auto Func.” at the “Audio InputSetup” menu, then press the ENTER button.• Display the “IEEE1394 Auto Func.” screen.2 Press the CURSOR FF or GG button to select“ON” or “OFF”.3 Press the ENTER button to enter the setting.• The “Audio Input Setup” menu reappears.OFF:Select this if you do not want to automatically playthe device.ON:Select this to automatically play the device.In some cases settings may be required on your player.Also refer to the player’s operating instructions.Tuner Presets¢ Auto Preset Memory• Use this to automatically search for FM broadcasts andstore up to 56 stations at preset channels A1 to 8, B1 to 8,C1 to 8, D1 to 8, E1 to 8, F1 to 8 and G1 to 8.1 Press the CURSOR DD or HH button to select“Tuner Presets” at the “Audio Input Setup”menu, then press the ENTER button.• Display the “Tuner Presets” screen.2 Press the CURSOR DD or HH button to select“Auto Preset Memory”, then press the ENTERbutton.• Switch to the “Auto Preset Memory” screen.3 Press the CURSOR FF button to select “Yes”.• “Search” flashes on the screen and searchingbegins.• “Completed” appears once searching is completed.• The display automatically switches to the “TunerPresets” screen.• If an FM station cannot be preset automatically due to poorreception, use the “Manual tuning” operation ( page 66)to tune in the station, then preset it using the manual“Preset memory” operation ( page 66).
