92Advanced OperationFUNCTION ZONE3/REC SELECTZONE2 SELECT1 Press the ZONE2 SELECT button to display the“ZONE2 SOURCE” on the display.2 Turn the FUNCTION knob to select the sourceyou want to output appears on the display.3 Start playing the source to be output.For operating instructions, refer to the manuals of therespective components.1 Press the ZONE3/REC SELECT button todisplay the “ZONE3 SOURCE” on the display.• The MULTI indicator light.The display switches as follows each time the buttonis pressed.2 Turn the FUNCTION knob to select the sourceyou want to output appears on the display.RECOUTZONE33 Start playing the source to be output.For operating instructions, refer to the manuals of therespective components.• The signals of the source selected in the ZONE3 mode arealso output from the VCR-1, VCR-2, VCR-3 and CDR/TAPErecording output terminals.• Digital signals are not output from the ZONE2 and ZONE3audio output terminals.• About the MULTI ZONE connections ( page 90, 91).• Digital outputs of the OPTICAL2, 3 and 4 OUT normallyswitch in association with the ZONE3/REC SELECT mode,but if “ZONE2 SELECT” is selected at “Digital Out Assign”,the source switches in association with the “ZONE2SELECT” mode for the OPTICAL2 OUT digital outputterminal ( page 121).Outputting a program source to anamplifier, etc., in a ZONE2 room(ZONE2 SELECT mode)Outputting a program source to anamplifier, etc., in a ZONE3 room(ZONE3 SELECT mode)AMPZONE2 ON/OFFMUTEVOLUMEZONE3 ON/OFF
