Denon AVR-5805 Operating Instructions Manual

Also see for AVR-5805: User manual Manual Supplementary guide Manual Operating manual

Contents

Denon AVR-5805 Operating Instructions Manual Manual pdf 121 page image

121(3) Using the system call functionNOTES:• The remote control signals of the buttons pressed while registering the system call signals are emitted, so be careful not to operate thecomponents accidentally (cover the remote sensors, for example).• If you exceed the number of signals that can be registered, there will be a changeover to the System Call registration screen.1 Press the button at which the system call signals have been stored.• The stored signals are transmitted successively.Punch Through(1) Punch through buttonButtons used in the CD, CDR, DVD, DVDR,VDP, VCR1 and VCR2modes can be assigned to the buttons which are not normallyused in the AMP, ZONE2, ZONE3, ZONE4, TV and DBS modes.For example, when the CD mode is set to the punch through modein the AMP mode, the CD mode’s PLAY, STOP, MANUALSEARCH, AUTO SEARCH and PAUSE buttons’ signals are sent inthe AMP mode.(2) Making the punch through setting12Press the power ON button and the OFF button at the sametime.RC-9953, 42(1)3, 4134 Press the mode button for the component you want to punchthrough, then press the ENTER button.• The punch through is set and the set returns to the normaloperating mode.Press the “4” button to select punchthrough setting.Press the mode button for the component you want to makethe punch through setting, then press the ENTER button.CH SELENTERCH SELENTER