956-7. Zone3 and Zone4 tone control and channel level setting1 Select “Zone3/4 Tone/Ch Lev.” at the Zone SetupMenu.• Adjust the sound output from Zone3 and Zone4.Z o n e 3 / 4* Z o n e S e t u p2 Display the Zone3/4 Tone/Ch Lev. screen. & + , ! "18 ! ,5 - 0)6 ., . ,:, ;" /0#- "&32 ' '6 . 42 "&CH SELENTER(Main unit) (Remote control unit)CH SELENTER(Main unit) (Remote control unit)3 Select the Zone whose sound you want to adjust.(Zone3, Zone4)Switch to the setting screen.(Main unit)CH SELENTER(Remote control unit)CH SELENTER(Main unit)(Remote control unit)B a s s : 0 d B* Z 3 T o n e / C h L e v4 q Select the item to be set. w Adjust the parameter.Bass : Adjust the tone for the bass.Treble : Adjust the tone for the treble.(The bass or treble sound can be adjusted between –12 dB and +12 dB in steps of 2.0 dB.)HPF : Set this to “ON” if your speakers do not have a very strong capacity for producing low bass. Using the high pass filtermakes it possible to reduce distortion of the bass sound.Channel Level : Set so that the playback level is the same for the left and right channels.(The volume can adjusted between –12 dB and +12 dB in steps of 1.0 dB.)CH SELENTER(Main unit) (Remote control unit)CH SELENTER(Main unit) (Remote control unit)32 '6 .9 %-9, 1 %-97:::/6 .%-9(/6 .%-9Example: When “Zone3” is selected5 Press the ENTER button to return to the Zone3/4 Tone/Ch Lev. screen.Use the same procedure to make the settings for Zone4.CH SELENTER(Main unit) (Remote control unit)Z 3 T o n e / C h L e v .* Z o n e 3 / 432 ' '6 .2 '6 .2 '6 . 4
