146ParametersMODE:DH1 ...........Reference room (small room with weak reverberations)DH2 ...........Live room (room with a bit stronger reverberations than DH1)DH3 ...........Large room (larger room than DH1, offers a sense of distance and sound diffusion effects)BYPASS .....Stereo sound.DECODER:Select this when playing analog, PCM or other 2-channel sources.The signals are converted into multichannel signals using the decoders shown below and played in the Dolby Headphone mode.PL II C........Dolby Pro Logic II Cinema modePL II M.......Dolby Pro Logic II Music modeNEO:6 C.....DTS NEO:6 Cinema modeNEO:6 M....DTS NEO:6 Music modeOFF............The signals are played in the Dolby Headphone mode as such (2 channels).– Recording –When RECOUT mode is set to “SOURCE”, with this amplifier signals encoded in the Dolby Headphone mode can be output from the recordingoutput terminals and recorded on another recorder. (See page 133)Memory and call-out functions (USER MODE function)• The AVR-5805 is equipped with a function for storing the selected input source, the auto surround mode and input mode in the memory andselecting these settings when you want to use them.• Three patterns of settings can be stored in the memory using the USER MODE 1, 2 and 3 buttons.2 Storing the settings in the memory21 The following are stored in the memory:q Currently set input sourcew Currently set auto surround modee Currently set input mode2 Press and hold the USER MODE button at which you want tostore the settings.In this case, press the button and hold it in until the LED ofthe selected USER MODE button lights.(Main unit)NOTE:• When the Setup Lock function is activated, memory operationof the USER MODE button can not be performed.2 Calling the settings out1 Press the USER MODE button at which the settings youwant to call out are stored.• The LED for the selected USER MODE button lights.• This LED turns off if you perform any operations thatchange the settings stored at the USER MODE buttons.Light22111(Main unit)(Remote control unit) (Remote control unit)(Remote control unit) (Remote control unit)
