126511Playing the input source1 Select the input source to be played.Example: CD(Main unit) (Remote control unit)To select the input source when ZONE2SELECT, ZONE3/4/REC SELECT orTUNING PRESET is selected, press theSOURCE button then operate the inputfunction selector.2 Select the input mode.• Selecting the analog modePress the ANALOG button to switch to the analog input.(Remote control unit)• Selecting the external input (EXT. IN) modePress the EXT. IN (on the EXT. IN button on the Remotecontrol unit) to switch the external input.(Remote control unit)(Main unit)• Selecting the AUTO, PCM and DTS modesThe mode switches as shown below each time the INPUTMODE button is pressed.RC-995215AUTO PCM DTS(Main unit)(Main unit)(Remote control unit)23(Main unit)33When the input source is selected theinput indicator lights.CDLightInput mode selection functionDifferent input modes can be selected for the different input sources.The selected input modes for the separate input sources are stored inthe memory.q AUTO (All auto mode)In this mode, the types of signals being input to the digital andanalog input jacks for the selected input source are detected andthe program in the AVR-5805’s surround decoder is selectedautomatically upon playback. This mode can be selected for allinput sources other than PHONO and TUNER.The presence or absence of digital signals is detected, the signalsinput to the digital input jacks are identified and decoding andplayback are performed automatically in DTS, Dolby Digital or PCM(2 channel stereo) format. If no digital signal is being input, theanalog input jacks are selected.Use this mode to play Dolby Digital signals.w PCM (exclusive PCM signal playback mode)Decoding and playback are only performed when PCM signals arebeing input.Note that noise may be generated when using this mode to playsignals other than PCM signals.e DTS (exclusive DTS signal playback mode)Decoding and playback are only performed when DTS signals arebeing input.r ANALOG (exclusive analog audio signal playback mode)The signals input to the analog input jacks are decoded and played.t EXT. IN (external decoder input jack selection mode)The signals being input to the external decoder input jacks areplayed. (page 128)
