13Connecting video components equipped with Component Video (color difference) video jacks(Component - Y, Pb, Pr ; Y, Cb, Cr)• When making connections, also refer to the operating instructions of the other components.• The signals input to the component (color difference) video jacks are not output from the VIDEO output jack (yellow) or the S-Video output jack.• Some video sources with component video outputs are labeled Y, PB , P R, or Y, C B, CR, or Y, B-Y, R-Y. These terms all refer to component videocolor difference output.• The function assigned to the component video input can be changed at the system setup. For details, see “Setting the Component In Assign”.(See pages 71, 72)Y PB PRVIDEO INCOMPONENTY PB PRVIDEO OUTCOMPONENTDVD player Monitor TVConnecting a DVD playerConnecting a monitor TVDVD IN jacks• Connect the DVD player’s component (color difference) video output jacks(COMPONENT VIDEO OUTPUT) to the COMPONENT DVD IN jack using 75/ ohms coaxial video pin-plug cords.• In the same way, another video source with component video outputs suchas a DTV/DBS tuner, etc., can be connected to the TV/DBS component(color difference) video jacks.MONITOR OUT jack• Connect the TV’s component (color difference) video input jacks (COMPONENT VIDEO INPUT) to theCOMPONENT MONITOR OUT-2 jack using 75 /ohms coaxial video pin-plug cords.• Connect the TV’s component (color difference) video input jacks (COMPONENT VIDEO INPUT) to theCOMPONENT MONITOR OUT-1 jack using BNC connectors.• The COMPONENT MONITOR OUT-1 and the COMPONENT MONITOR OUT-2 can be used simultaneously.• The component video input and/or output jacks may be labeled differentlyon some TVs, monitors or video components (Y, Pb, Pr; Y, Cb, Cr; Y, B-Y, R-Y). Check the owner’s manuals for other components for furtherinformation.(MONITOR OUT / ZONE2)(MONITOR OUT / ZONE2)(MONITOR OUT / ZONE2)The Video Conversion FunctionThe AVR-5805 is equipped with a function for up and down converting video signals.Because of this, the AVR-5805’s MONITOR OUT jack can be connected to the monitor (TV) with a set of cables offering a higherquality connection, regardless of how the player and the AVR-5805’s video input jacks are connected.Generally speaking, connections using the component video jacks offer the highest quality playback, followed by connectionsusing the S-Video jacks, then connections using the regular video jacks (yellow).This unit’s input jacks This unit’s output jacksThe flow of the video signals.(Component Video Jacks)(S-Video jack)(Video jack)(Component Video Jacks)(S-Video jack)(Video jack)Cautions on the Zone2 video conversion function:There is no TBC (Time Base Collector) for Zone2.When the component video terminals are used to connectthe AVR-5805 with a TV (or monitor, projector, etc.) and thevideo (yellow) or S video terminals are used to connect theAVR-5805 with a VCR, depending on the combination of theTV and VCR the picture may flicker in the horizontaldirection, be distorted, be out of sync or not display at allwhen playing video tapes.If this happens, connect a commercially available videostabilizer, etc., with a TBC (time base corrector) functionbetween the AVR-5805 and the VCR, or if your VCR has aTBC function, turn it on.( : only 480i/580i )
