16Connecting the antenna terminals142 3DIRECTION OFBROADCASTINGSTATION75 /ohmsCOAXIALCABLEFM ANTENNAFM INDOORANTENNA(Supplied)AM LOOPANTENNA(Supplied)AM OUTDOORANTENNAGROUNDAM loop antenna assemblyConnect to the AMantenna terminals.Remove the vinyl tieand take out theconnection line.Bend in the reversedirection.a. With the antennaon top any stablesurface.b. With the antennaattached to a wall.MountInstallation holeMount on wall, etc.• An F-type FM antenna cable plug can be connected directly.Connection of AM antennas1. Push the lever. 2. Insert the conductor. 3. Return the lever.Note to CATV system installer:This reminder is provided to call the CATV system installer’s attention toArticle 820-40 of the NEC which provides guidelines for proper groundingand, in particular, specifies that the cable ground shall be connected to thegrounding system of the building, as close to the point of cable entry aspractical.Notes:• Do not connect two FM antennas simultaneously.• Even if an external AM antenna is used, do not disconnectthe AM loop antenna.• Make sure AM loop antenna lead terminals do not touchmetal parts of the panel.Connecting the external input (EXT. IN) jacks• AVR-5805 is equipped with two analog external input terminals for 9.1 channels and 5.1 channels.• These jacks are for inputting multi-channel audio signals from an outboard decoder, or a component with a different type of multi-channeldecoder, such as a DVD Audio player, or a multi-channel SACD player, or other future multi-channel sound format decoder.• When making connections, also refer to the operating instructions of the other components.LR LRLRLR LR LRDecoder with 10-, 8- or 6-channel analog outputFrontSurround backSurround ASubwooferCenterFor instructions on playback using theexternal input (EXT. IN) jacks, see page 128.See pages 60, 61 for “Setting the EXT.INSetup”.Surround BSurroundSubwooferFrontCenterDecoder with 6-channel analog output
