Denon AVR-A100 Owner's Manual

Also see for AirPlay AVR-4311CI: Addiction of new function Adición de una función nueva Brochure & specs Addendum sheet Owner's manual

Contents

102ENGLISHSetting items Setting detailsNetwork Connecting(Continued)r Use o p to select the proxy server input method, and then press i.Address : Select when inputting by address.Name : Select when inputting by domain name.t Use uio p or 0 – 9 to input the proxy serveraddress or domain name and press ENTER.When “Address” is selected in step r : Inputthe addressWhen“Name” is selected in step r : Input thedomain name• For character input, see page 78.y Use uio p or 0 – 9 to input the proxy server port number and pressENTER.u Use i to select “Exit” and press ENTER.Setup is complete.OtherNetwork function on/offsetting during standby, andPC language setting.Network Standby : Set the network function on/off during standby.• ON : Network is on during standby. Main unit operable with a networkcompatible controller.• OFF : Suspend network function during standby.Set to “ON” when using the web control function.NOTEWhen “Other” – “Network Standby” is set to “ON”, it consumesmore standby power.Character : When characters are not displayed correctly, set the MP3 ID3-Tag character code type reproduced by the USB memory device.• Auto : Auto-select character code.• Latin : Select ISO 8859-1 Latin-1.• Japanese : Select Shift-JIS.If the characters are not properly displayed when set to “Auto”, set to“Latin” or “Japanese”.PC Language : Select computer environment language.• ara / chi (smpl) / chi (trad) / cze / dan / dut / eng / fin / fre / ger / gre /heb / hun / ita / jpn / kor / nor / pol / por / por(BR) / rus / spa / swe / turFriendly Name Edit : The Friendly Name is the name of this unit displayedon the network. Up to 63 characters can be input. The default FriendlyName on first use is “DENON:[AVR-A100]”.• For character input, see page 78.Default : Restores Friendly Name, which you had changed, to the defaultsetting.• Yes : Reset to the defaults.• No : Do not reset to the defaults.Party Mode Function : Set the Party Mode function.• ON : Enable party mode function.• OFF : Disable party mode function.Refer to page 68, “Party mode function” for more information on theparty mode function.Remote control operationbuttonsMove the cursor(Up/Down/Left/Right) Confirm the setting Return to previous menuMANUAL SETUPSetting items Setting detailsOther(Continued)Party Start Level : Make settings for volume level when the party modeis started.• Last : The same volume as set before the party mode was started.• – – –dB (0) : Always use the muting on condition when the party modeis started.• –80dB – 18dB (1 – 99) : Start party mode with your preferred volume.• This can be set when “Party Mode Function“ is set to “ON“.• This is displayed from 0 to 99 when “Volume Display” (vpage 104) is setto “Absolute”.• You can set to the upper limit set with “Volume Limit” (vpage 104) .Network Status : Displays up to a maximum of 10 DENON productsconnected on the same network.• Friendly Name / Party Mode Status / Model Name /Power ON/Standby / Select Source / Volume Level“Network Status” is only displayed for DENON products supportingthe Network Status function.Update Notification : Displays a notification message on this unit’s menuscreen when the latest firmware is released with “Firmware Update”. Thenotification message is displayed for about 20 seconds when the poweris turned on. Connect to broadband Internet (vpage 26) when using thisfunction.• ON : Display update message.• OFF : Do not display update message.• When you press ENTER during display of the notification message,the “Check for Update” screen is displayed. (Refer to page 106 for moreinformation on “Firmware Update”)• Press RETURN to erase the notification message.Upgrade Notification : Display a notification message on this unit’smenu screen when downloadable firmware is released with “Add NewFeature”. The notification message is displayed for about 20 secondswhen the power is turned on. Connect to broadband Internet (vpage 26)when using this function.• ON : Display upgrade message.• OFF : Do not display upgrade message.• When you press ENTER during display of the notification message,the “Add New Feature” screen is displayed. (Refer to page 106 for moreinformation on “Add New Feature”)• Press RETURN to erase the notification message.