118ENGLISHSwitching the multi-zone input source tothe same input source as used in the MAINZONEThis function is convenient for example when you want to listen to thesame song as the one playing in the MAIN ZONE while in a differentzone.1 ZONE SELECT !"/ !"2The currently selected multi-zoneindicator illuminates.2 M.ZONE CALL $The multi-zone input source switches tothe MAIN ZONE’s input source.NOTE• This function cannot be used for the MAIN ZONE.• When M.ZONE CALL is pressed while the multi-zone power is off,the multi-zone power turns on and the input source switches to theMAIN ZONE’s input source.Setting the zone for which the sub remotecontrol unit is used(Zone select lock mode)We recommend always using the sub remote control unit for thesame room. When this is done, the unit can be set so that the zonedoes not switch when buttons are operated.1 * ADVANCED SETUPAll the multi-zone indicators illuminate. ADVANCED SETUP2 4 $ $% The selected multi-zone indicatorilluminates.q To set to “MAIN ZONE”Press REPEAT.w To set to “ZONE2”Press RANDOM.e To set to “ZONE3”Press USB.r To set to “ZONE4”Press ALL MUSIC/FAVORITES.3 * ADVANCED SETUPThe multi-zone indicator turns off.n To cancel1 * ADVANCED SETUPThe currently selected multi-zoneindicator illuminates.ADVANCED SETUP2 ZONE SELECTAll the multi-zone indicator illuminates.3 * ADVANCED SETUPThe multi-zone indicator turns off.Operating the sub remote control unitSetting the remote IDWhen using multiple DENON AV receivers in the same room, makethis setting so that no AV receiver other than the desired one operates.1 8 $ MENU' ADVANCED SETUP The multi-zone indicator correspondingto the currently selected remote IDflashes. ADVANCED SETUP2 4 $ 6 q To set to 1Press REPEAT.The “M” indicator flashes.w To set to 2Press RANDOM.The “Z2” indicator flashes.e To set to 3Press USB.The “Z3” indicator flashes.r To set to 4Press ALL MUSIC/FAVORITES.The “Z4” indicator flashes.3 8 $ MENU' ADVANCED SETUP The multi-zone indicator turns off.NOTEWhen changing a setting, be sure to set the same remote ID as thisunit’s (vpage 105).Resetting the settings8 $ ZONE OFF' ADVANCED SETUP All the multi-zone indicators flash four times,then all the settings are restored to theirdefaults. ADVANCED SETUP