Denon AVR-A100 Owner's Manual

Also see for AirPlay AVR-4311CI: Addiction of new function Adición de una función nueva Brochure & specs Addendum sheet Owner's manual

Contents

103Basic versionSimple version InformationENGLISH Advanced versionRemote control operationbuttonsMove the cursor(Up/Down/Left/Right) Confi rm the setting Return to previous menuMANUAL SETUPSetting items Setting detailsRhapsody AccountSet or change Usernameand Password (vpage 46“Listening to Rhapsody”).Username / Password / Clear• For character input, see page 78.Napster AccountSet or change Usernameand Password (vpage 42“Listening to Napster”).Username / Password / Clear• For character input, see page 78.Network Info.Display network information.Friendly Name / DHCP / IP Address / MAC AddressZone Setup Default settings are underlined.Set the audio to play back with multi-zone (ZONE2, ZONE3).Setting items Setting detailsBassAdjust low frequency range(bass).–10dB – +10dB (0dB)TrebleAdjust high frequency range(treble).–10dB – +10dB (0dB)HPFMake settings for cuttingthe low range to reducedistortion in the bass.ON : The low range is attenuated.OFF : The low range is not attenuated.Lch LevelAdjust the left channeloutput level.–12dB – +12dB (0dB)The “Lch Level” can be set when “Channel“ (vpage 103) is set to“Stereo“.Rch LevelAdjust the right channeloutput level.–12dB – +12dB (0dB)The “Rch Level” can be set when “Channel“ (vpage 103) is set to“Stereo“.ChannelSet the signal output frommulti-zone.Stereo : Select stereo output.Mono : Select mono output.When “Amp Assign” – “Assign Mode” (vpage 95) is set to “Z2/3-MONO”, the “Channel” setting is automatically set to “Mono”.Setting items Setting detailsVolume LevelSet the volume output level.Variable : Volume adjustment is enabled by main unit and remote controlunit.–40dB (41) : Fix volume at –40 dB. Set when adjusting volume by externalamplifi er.0dB (81) : Fix volume at 0 dB. Set when adjusting volume by externalamplifi er.When “Amp Assign” – “Assign Mode” (vpage 95) is set to“ZONE2”, “ZONE2/3” or “Z2/3-MONO”, the “Volume Level” settingis automatically set to “Variable”.Volume LimitMake a setting formaximum volume.OFF : Do not set a maximum volume.–20dB (61) / –10dB (71) / 0dB (81)• This can be set when the multi-zone “Volume Level” setting (vpage 103)is “Variable”.• This is displayed from 0 to 99 when “Volume Display” (vpage 104) is setto “Absolute”.Power On LevelDefi ne the volume settingthat is active when thepower is turned on.Last : Use the memorized setting from the last session.– – –dB (0) : Always mute when power is turned on.–80dB – 18dB (1 – 99) : The volume is adjusted to the set level.• This can be set when the multi-zone “Volume Level” setting (vpage 103)is “Variable”.• This is displayed from 0 to 99 when “Volume Display” (vpage 104) is setto “Absolute”.Mute LevelSet the amount ofattenuation when mutingis on.Full : The sound is muted entirely.–40dB : The sound is attenuated by 40 dB down.–20dB : The sound is attenuated by 20 dB down.