Denon AVR-A100 Owner's Manual

Also see for AirPlay AVR-4311CI: Addiction of new function Adición de una función nueva Brochure & specs Addendum sheet Owner's manual

Contents

136ENGLISHGHDMIHSymptom Cause/Solution PageNo audio isoutput with HDMIconnection.• Check the connection of the HDMI connectors.• When outputting HDMI audio from the speakers, set “HDMIAudio Out” on the menu to “AMP”.• When outputting HDMI audio from a TV, set “HDMI Audio Out”on the menu to “TV”.179898No video isoutput with HDMIconnection.• Check the connection of the HDMI connectors.• Set the input source to match the connected HDMI connector.• Check whether the TV is compatible with copyright protection(HDCP). If connected to a device not compatible with HDCP, videowill not be output correctly.1717, 2816When the followingoperations areperformed ondevices compatiblewith HDMI control,the same operationsoccur on this unit.• Power ON/OFF• Switching audiooutput devices• Adjust volume• Switch input source• Set “HDMI Control” on the menu to “OFF”. To operate poweronly for each device, set “Power Off Control” to “OFF”.65, 99GSIRIUS Satellite RadioHSymptom Cause/Solution Page“CHECK SIRIUSTUNER” is displayed.• The SiriusConnect Home Tuner unit is not connected. Check thatthe connections are correct.23”ANTENNA ERROR”is displayed.• The antenna is not connected. Check that the connections arecorrect.23”NO SIGNAL” isdisplayed.• The antenna is not connected. Check that the connections arecorrect.–”INVALIDCHANNEL” isdisplayed.• Channel is not present. Select another channel. –”ACQUIRINGSIGNAL” isdisplayed.• The signal cannot be received. Reposition your SiriusConnectHome Tuner and Home Dock antenna.• Displays while SiriusConnect Home Tuner is connected. Repositionyour SiriusConnect Home Tuner and Home Dock antenna.––”Call SIRIUS”z isdisplayed.• Channels are not subscribed to. If you subscribe to the channel,you can receive the channel.–”SUBSCRIPTIONUPDATED” isdisplayed.• While updating contract information. –”Enter Lock Code[ ]” is displayed.• Selected channels are locked. Please insert pass word (4 digits)into “[ ]”–z After scroll displays “Call 888-539-....” twice, displays “Call SIRIUS”.Symptom Cause/Solution PageAudyssey DSX™cannot be selected.Or “Not Available”is displayed whenAUDYSSEY DSXbutton is pressed.• Check that “Speaker Config.” – “Front Height” or “Front Wide” isset to other than “None”.• Check that “Speaker Config.” – “Center” is set to other than“None”.• Switch the surround mode to STANDARD.• Check that “Input Mode” is set to other than “EXT.IN”.• When headphones are used, Audyssey DSX cannot be selected.96965084–MultEQ® XT 32,Dynamic EQ® andDynamic Volume®cannot be selected.Or “Not Available”is displayed whenMULTEQ button orDYN EQ/VOL buttonis pressed.• Switch the surround mode to other than “DIRECT”or“PUREDIRECT”.• Check that “Input Mode” is set to other than “EXT.IN”.• When headphones are used, MultEQ XT 32, Dynamic EQ andDynamic Volume cannot be selected.5284–Dynamic EQ andDynamic Volumecannot be selected.Or “Run AudysseyAuto Setup” isdisplayed when DYNEQ/VOL button ispressed.• Make Audyssey Auto Setup. 7, 63RESTORER cannotbe selected. Or“Not Available” isdisplayed when theRESTORER button ispressed.• Check that an analog signal or PCM signal fs=44.1/48kHz isinput. For playback of multichannel signals such as Dolby Digital orDTS surround, RESTORER cannot be used.• Check that “Input Mode” is set to other than “EXT.IN”.9284