Denon AVR-A100 Owner's Manual

Also see for AirPlay AVR-4311CI: Addiction of new function Adición de una función nueva Brochure & specs Addendum sheet Owner's manual

Contents

104ENGLISHRemote control operationbuttonsMove the cursor(Up/Down/Left/Right) Confi rm the setting Return to previous menuMANUAL SETUPOPTION Option Setup Default settings are underlined.Make various other settings.Setting items Setting detailsVolume ControlSet the MAIN ZONE (roomwhere the unit is located)volume setting.Volume Display : Set how volume is displayed.• Relative : Display ---dB (Min), in the range –80.5 dB to 18 dB.• Absolute : Display in the range 0 (Min) to 99.• The “Volume Display” setting is applied also to the “Volume Limit” and“Power On Level” display method.• The “Volume Display” setting applies to all zones.Volume Limit : Make a setting for maximum volume.• OFF : Do not set a maximum volume.• –20dB (61) / –10dB (71) / 0dB (81)Power On Level : Define the volume setting that is active when thepower is turned on.• Last : Use the memorized setting from the last session.• – – –dB (0) : Always use the muting on condition when power is turnedon.• –80dB – 18dB (1 – 99) : The volume is adjusted to the set level.Mute Level : Set the amount of attenuation when muting is on.• Full : The sound is muted entirely.• –40dB : The sound is attenuated by 40 dB down.• –20dB : The sound is attenuated by 20 dB down.Source DeleteRemove from the displayinput sources that are notused.PHONO / CD / BD / DVD / TV / SAT/CBL /DVR / GAME / V.AUX / DOCK / NET/USB /SIRIUS / HD Radio : Select input source thatis not used.• ON : Use this source.• Delete : Do not use this source.NOTE• Input sources being used in the variouszones cannot be deleted.• Input sources set to “Delete” cannot beselected using SOURCE SELECT.GUIMake the settings related todisplays on the TV screen.Screensaver : Make screensaver settings.• ON : The screensaver is activated during menu display, NET/USB, iPod,SIRIUS or HD Radio screen display if no operation is performed for anapproximately 3-minute continuous period. When you press uio p,the screensaver is cancelled and the screen before that screen saverstarted is displayed.• OFF : Screensaver is not activated.Setting items Setting detailsGUI(Continued)Wall Paper : Set wallpaper to display in the background when playbackis stopped, etc.• Picture : Set the background to a picture (DENON logo).• Black : Set the background to black.• Gray : Set the background to gray.• Blue : Set the background to blue.Format : Set the video signal format to be output for the TV you are using.• NTSC : Select NTSC output.• PAL : Select PAL output.“Format” can also be set by the followingprocedure. However, the menu screen is notdisplayed.1. Press and hold the main unit’s AUDYSSEYDSX and RETURN for at least 3 seconds.“Video Format” appears on the display.2. Press o p and set the video signal format.3. Press the main unit’s ENTER, MENU orRETURN to complete the setting.NOTEWhen a format other than the video format of the connected TV is set, thepicture will not be displayed properly.Text : Display the details of operation when switching surround mode,input mode, etc.• ON : Turn display on.• OFF : Turn display off.Master Volume : Display the master volume during adjustment.• Bottom : Display at the bottom.• Top : Display at the top.• OFF : Turn display off.When the master volume display is hard to see when superimposedon movie subtitles, set to “Top”.NET/USB : Set the NET/USB screen display time when the input sourceis “NET/USB”.• 30s : Show display for 30 seconds after operation.• 10s : Show display for 10 seconds after operation.• OFF : Turn display off.• Always : Show display continuously.iPod : Set the iPod screen display time when the input source is “DOCK”or “iPod (USB)”.• 30s : Show display for 30 seconds after operation.• 10s : Show display for 10 seconds after operation.• OFF : Turn display off.• Always : Show display continuously.