Eaton CROUSE-HINDS series Instruction Manual
Also see for Crouse-hinds series: Operating instructionsInstruction manualOperating instructionsOperating instructionsSoftware manual
                                                    | |
Contents
| 
INM MTL RugiCAM-IP Rev 59• Input Manual Exposure Time in nSec• Input Exposure Gain 1 to 10006 1 3 Day-Night Mode Shift:• Day-Night Mode Shift:Click ‘Manual’ or the ‘Dynamic’ button to enable the requiredexposure method• Manual:The day/night mode can be set manually.• Day• Night• Dynamic:The day/night mode can auto switch depending on the brightness.• Min Brightness (1- 45):when the brightness is lower than min, night mode will open.• Max Brightness (1- 45):when the brightness is higher than max, day mode will open.• Depend on photosensitive sensorClick button to enable the ‘Depend on photosensitive sensor’ setting.• High When Day:There is a photosensitive chip located on the IR LED board, in low lightconditions a signal will be sent to the CPU and the CPU will set thecamera to night mode.• High When Night:There is a photosensitive chip located on the IR LED board, in nightimelight conditions a signal will be sent to the CPU and the CPU will setthe camera to night mode. |
Related manuals for Eaton Crouse-hinds series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine