Eaton CROUSE-HINDS series Instruction Manual
Also see for Crouse-hinds series: Operating instructionsInstruction manualOperating instructionsOperating instructionsSoftware manual
                                                    | |
Contents
| 
INM MTL RugiCAM-IP Rev 54318 APPENDIX F - RUGICAM-IP ROUTING NOTES(Software Revision v1.2.065 build 130218(EATON) or later)18 1 One Network Connection OnlyThe RugiCAM-IP has two network connections, the copper LAN and the WIFI LAN.Only one of these connections can be used at any time (power limitation constraintsfor Intrinsically Safe operation).18 2 Copper Network ConnectionWhen the RugiCAM-IP is powered, and there is a linked physical copper LANconnection, then the WIFI circuit is disabled. The camera is now only accessible viathe copper LAN. Below is an example of the copper LAN Settings:IP address of the copper LAN connectionSubnet mask for the copper LAN connectionDefault Gateway, the Camera uses thisdevice for IPs not on the local subnetResolves names to IPs18 3 No Copper LAN Connection At Power Up Wifi Connection AvailableWhen the RugiCAM-IP is powered and there is no linked physical copper LANconnection, then the copper connection is disabled and the WIFI connection willconnect to the configured access point. The camera is now only accessible via theWIFI connection.Below is an example of the WIFI LAN Settings:IP address of the WIFI LAN connectionSubnet mask for the WIFI LAN connectionDefault Gateway, the Camera uses thisdevice for IPs not on the local subnetResolves names to IPs |
Related manuals for Eaton Crouse-hinds series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine