Eaton CROUSE-HINDS series Instruction Manual
Also see for Crouse-hinds series: Operating instructionsInstruction manualOperating instructionsOperating instructionsSoftware manual
                                                    | |
Contents
| 
42INM MTL RugiCAM-IP Rev 517 APPENDIX E - ONVIF DEVICE MANAGEMENT SOFTWARE17 1 The Onvif (Open Network Video Interface)Device Management Software v2.2.250 can be used to setup and monitor RugiCam-IP including the streaming of live video from it as can be seen below. The applicationcan be obtained from the sourceforge site, address https://sourceforge.net/projects/onvifdm/.Go to the website indicated above and press the download button which will thendownload odm-v2.2.250.msi (this is the version at time of writing), size of file20.9MB when completed and the security check verifies the software install on thetarget computer.When the application runs it will scan the subnet the computer is connected to forany equipment responding to the ONVIF protocol and displays the results in the lefthand column as shown above.The second column from the left is split into two sections the top one deals withthe setting of the camera while the bottom section is concerned with the live videofeeds.17 2 Network SettingSelecting Network Settings from the top half of column two reveals all the networkparameters as shown below. |
Related manuals for Eaton Crouse-hinds series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine