Eaton CROUSE-HINDS series Instruction Manual

Also see for Crouse-hinds series: Operating instructions Instruction manual Operating instructions Operating instructions Software manual

Contents

Eaton CROUSE-HINDS series Instruction Manual Manual pdf 17 page image

INM MTL RugiCAM-IP Rev 5136 2 4 Block MaskThere are two ways to select the area mask. Quick select and Value input selectUp to 4 area masks can be set on the video.• Quick select:1 Click “Enable” check box and click “Edit” on the right.2 Drag mouse on the video to select the area mask.3 Click “Apply”.• Value input select:1 Click “Enable” check box.2 Input the values of X, Y, Width and Height, then click “Edit”.3 Click “Apply”.• Clean area mask:1 Click “Edit” of the area mask you want to remove.2 Click “Reset”.3 Click “Apply”.6 2 5 Encoding ParameterSelect a Profile, click check box to select and save the selected profile.• BaseLine Profile:Baseline encodes are the most basic form of encoding. While decoding is mucheasier, it may also require much higher bit-rates to maintain the same level of quality.• Main Profile:The middle ground. Most modern / current devices will support this profile.• High Profile:For best quality and file size at the expense of CPU time in both decode and encode.