Eaton CROUSE-HINDS series Instruction Manual
Also see for Crouse-hinds series: Operating instructionsInstruction manualOperating instructionsOperating instructionsSoftware manual
                                                    | |
Contents
| 
INM MTL RugiCAM-IP Rev 555. Specify IP address and DNS server as in the screenshot below.6. If necessary, wait for around 45 seconds for the IP Camera to boot up.7. Open Internet Explorer, browse for the IP address of theCamera (http://192.168.0.168/).8. You should see a login Window where you can enter the usernameand Password.User Name: adminPassword: admin9. If you run this camera at the first time, you may not be able to see the livevideo before you install ActiveX. Please refer to Appendix A to install theActiveX control.NOTEThe default IP address is static IP 192.168.0.168. You can change the static IPaddress or set network setting to DHCP in Web Interface.5 2 Connecting RugiCAM-IP to a NetworkThe IP Camera can also be connected to a network.To connect the IP Camera to a network via a Router. Make sure the client PC withcorrect OS is also connected to the same network.Connect the external Power to the IP Camera.The router will assign an IP address to the IP Camera.The IP Camera will show up on the PC as a UPnP device. UPnP device can be foundin File Explorer>Network (left Pane)>Other Devices. |
Related manuals for Eaton Crouse-hinds series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine