Eaton CROUSE-HINDS series Instruction Manual

Also see for Crouse-hinds series: Operating instructions Instruction manual Operating instructions Operating instructions Software manual

Contents

Eaton CROUSE-HINDS series Instruction Manual Manual pdf 7 page image

INM MTL RugiCAM-IP Rev 534 INSTALLATION4 1 Camera UnitThe RugiCAM-IP is an Intrinsically Safe IP Network Camera capable of producing highquality colour video images at up to 1920x1080p at 30fps.The H.264 compression technique ensure optimal bandwidth usage of the Ethernetnetwork and compatibility with all major video streaming players.Optional LED lighting units are available to further enhance the cameras low lightcapability where needed. These are available as either White LED or Infra-Red (IR)LED types to suit the application, the IR type also having an ambient light sensorthat can automatically switch the camera to IR night mode (monochrome) whilst alsoturning on all connected IR LED units.The IP66 rated units are constructed from high quality anodised aluminium, powdercoated steel or stainless steel to suit different applications and environments andcontains a fully encapsulated camera (or LED) module. The resulting compact andcost effective solution is suited to many HD video monitoring and surveillanceapplications in and around the Hazardous Area.The connections are made by multi-pin M12 plug and sockets on the rear of theunit. This allows easy installation and maintenance in the event of a damaged cableassembly.WARNING!This equipment must be installed, operated and maintained only be trainedcompetent personnel and in accordance with all appropriate international,national and local standard codes of practice and site regulation for intrinsicallysafe apparatus and in accordance with the instructions contained here.NOTERefer to the certificate for ‘Special Conditions of Safe use’. Copied below: -The following conditions relate to safe installation and/or use of the equipment.1. Versions of the enclosure can be manufactured from aluminium (part number includes AA –Anodised Aluminium). In rare cases, ignition sources due to impact and friction sparks couldoccur with this type of enclosure. This shall be considered during installation, particularly if theequipment is installed in a Zone 0 or Group I (mining) location. If in doubt, use a stainless steel(SS) or coated/painted steel (CS) enclosure.2. If the enclosure is coated or painted then it must be installed in such a manner that thedanger of ignition of flammable dust due to propagating brush discharges is avoided.4 2 LED Unit• White led (colour temperature 6500k) unit. led angle 170degrees.• IR led ( wavelength 850nm) unit. led angle 120degrees• Each led unit requires an is power supply on connector x1• LEDconnector x2 connects to camera connector x2 (day/night control by ledunit 1 sensor)Camera Unit LED Unit