8 Technical Data8.2 General rating data118 DE1… Variable Speed Starter 11/16 MN040011EN www.eaton.com8.2 General rating dataSymbol Unit ValueStandards Specification for general requirements: IEC/EN 61800-2EMC requirements: IEC/EN 61800-3;Safety requirements: IEC/EN 61800-5-1Certifications and manufacturer’s declarations onconformityCE, UL, cUL, c-TickProduction quality RoHS, ISO 9001Climatic proofing ρw % < 95%, average relative humidity (RH),non-condensing, non-corrosive, no dripping water (IEC/EN 61800-5-1)< 95%, average relative humidity (RH),non-condensing, non-corrosive, no dripping water (IEC/EN 61800-5-1)Ambient temperatureOperationIP20 (NEMA 0) ϑ °C -10 - +60)Exception: The following device types use derating:DE1…-34016NN-N20NDE1…-34016FN-N20N.Storage ϑ °C -40 - +70Impact resistance (EN 60068-2-27) 15 g/11 ms (under operating conditions)• Mounted on DIN-rail• Mounted on mounting plate with screwsVibration as per IEC/EN 61800-5-1 Transportation as per IEC/EN 61800-2DE1... transported as a single device in a separate package and UPSdrop test (15 g/11 ms)MTBF (mean time between failures) DE1…-12… (FS1): > 73 yearsDE1…-12… (FS2): > 17 yearsDE1…-34… (FS1): > 88 yearsDE1…-34… (FS2): > 73 yearsElectrostatic discharge (ESD, IEC 61800-3 U kV ±4, contact discharge / ±6, air dischargeFast transient Burst (IEC 61800-3) 5 kHz for 5 min. / 100 kHz for 5 min.Radio interference class (EMC)Category and maximum screened motor cable length withintegrated radio interference suppression filterC1 (only at DE1…-12…) l m 5C2 l m 10C3 l m 25Interference immunity C3Maximum motor cable lengthnot screened l m 12 5screened l m 65Mounting position Any, not suspended (front not facing downwards),vertical only with DE1-121D4…, DE1-122D3… devicesAltitude h m 0 - 1000 above sea level, > 1,000 with 1 % load current reduction(derating) for every 100 m, Max. 2000Degree of protection IP20 (NEMA 0)Protection against contact BGV A3 (VBG4, finger- and back-of-hand proof)