Eaton SC200 Operation Handbook

Also see for SC200: Installation and operation guide Installation and operation guide

SC200 Handbook4 Copyright © 2007-2011 Eaton Corporation. All Rights Reserved.IPN 997-00012-50H November 2011 SC200 system controller I/O board Voltage feed module USB communications Ethernet communications RS232 communications Digital relay outputs (6) to external devices and/oralarm indication system Digital inputs (6) from external voltage-free switchesor relay contacts Connection to additional I/O board(s) and/orSiteSure-3G I/O module(s) Connection to dc common bus Connection to dc live bus Communications to rectifiers DC power system digital inputs (Load Fuse Fail,Battery Fuse Fail, AC Distribution Fan Fail, ACDistribution MOV Fail) Connections for battery mid-points (4) Connection for temperature sensors (2) Connection for current sensors (3) Connection for LVD contactor and auxiliary switch Connection for LVD contactor and auxiliary switch Bus voltage sense and LVD power connections I/O and system controller power and RXP commsconnections For connector pin-outs see details on page 114. For input and output specifications see details onpage 105.Compatible SoftwareThe following software is compatible with the SC200 system controller:DCTools Configuration Software. Latest version is available free fromdcpower.eaton.com/downloads.PowerManagerII Remote Control and Monitoring Software. Contact your Eaton dc productsupplier for further information (see Worldwide Support on page 125).Recommended web browsers: Microsoft Internet Explorer 8 or later (IE6 is compatible butwith reduced performance), Mozilla Firefox 3.0 or later.