Eaton SC200 Operation Handbook

Also see for SC200: Installation and operation guide Installation and operation guide

SC200 Handbook32 Copyright © 2007-2011 Eaton Corporation. All Rights Reserved.IPN 997-00012-50H November 2011RectifiersThe SC200 registers all rectifier modules as they are inserted into the dc power system.InformationThe following information is available about rectifiers.Parameter Description Where to find:State Registered - communicating with the SC200.Un-registered - there is a rectifier compatibility orcommunications problem.SC200: Rectifiers > Enter(Use Left and Right keys toscroll to other rectifiers)DCTools/Web: RectifiersSerial Number(S/N)Rectifier serial number.Load Based RunTimeThe time the rectifier has been operating since it wasregistered.AC Voltage The ac voltage measured by the rectifier (single-phaserectifiers only).Phase Voltages The ac phase voltages measured by the rectifier (three-phase rectifiers only).Voltage Rectifier's dc output voltage.Current Rectifier's output current.Heatsink Temp The measured rectifier heatsink temperature.Max Power (Limit) Rectifier's maximum output power (factory set).Power Rectifier output power as a percentage of Max. PowerLimit.DCTools/Web: RectifiersMax Current Limit The maximum current limit value of the rectifier. Adjust Rectifier Current Limit to set a loweroperating current limit.Min OVSD SetPointThe minimum Over Voltage Shut Down set point thatthe rectifier accepts.Max OVSD SetPointThe maximum Over Voltage Shut Down set point thatthe rectifier accepts.Status Information about rectifier alarms.Type Rectifier manufacturer's model number. SC200: Rectifiers > Enter(Use Left and Right keys toscroll to other rectifiers)Software Version Version of rectifier embedded software.