Eaton SC200 Operation Handbook

Also see for SC200: Installation and operation guide Installation and operation guide

SC200 OperationCopyright © 2007-2011 Eaton Corporation. All Rights Reserved.IPN 997-00012-50H November 2011 15► To view the SC200 timeEither:Use the keypad to go to: Info. This time is set to Universal Coordinated Time (UTC). DCTools, Web and PowerManagerIIconvert local PC time to/from UTC for the SC200. For practical purposes UTC is equivalentto Greenwich Mean Time (GMT).Or:In DCTools go to: Configuration > Identity. This time is set to the SC200 time adjusted to the time zone set in the PC.Or:In Web go to: Configuration > Time. This time is set to the SC200 time adjusted to the time zone set in the PC.► To set the time1 Connect to the SC200 via a web browser. (See Ethernet Communications on page 82.)2 Go to Configuration > Time.3 Click on the time-date field to select the text.4 Select the time or date text to be changed and type the correct time/date.5 Press Enter on the keyboard. Then select Apply in the Changes window.Time SynchronizationIf required, the SC200 time can be synchronized either to the internal time of a PC or laptop, orto a reference time server using SNTP protocol (SC200 must have access to the server).► To synchronize the SC200 time using DCTools or PowerManagerII1 Ensure the time on the PC is correct before synchronizing. PowerManagerII can be set to automatically synchronize SC200 clocks.2 Connect to the SC200 with DCTools/PowerManagerII. (See Communications Options on page82.)3 Go to Configuration >Identity > Time Synchronization4 Click Synchronize to synchronize the SC200 time to the PC/laptop time. DCTools, Web and PowerManagerII convert local PC time to/from UTC for the SC200.► To synchronize the SC200 time using SNTP For more information on SNTP, including a list of public SNTP servers, visit www.ntp.orghttp://www.ntp.org. Ensure that your network has an internal SNTP server or allows access to an external server. Itmay be necessary to configure access through your network's firewall.1 Connect to the SC200 via DCTools/Web.2 Either:In DCTools go to Configuration > Configuration > SNTP, orIn Web go to Configuration > Time > SNTP.