Eaton SC200 Operation Handbook

Also see for SC200: Installation and operation guide Installation and operation guide

SC200 Handbook10 Copyright © 2007-2011 Eaton Corporation. All Rights Reserved.IPN 997-00012-50H November 2011Changing a Configuration Setting using the KeypadFor the configuration settings that can be changed using the keypad, the keys have thefollowing functions.Press to change the setting or activate a control process.Press to change the value. Hold key to change at a faster rate.Use these keys for values with multiple segments (for example an IP address).Press to save the new value.OrPress to leave the value unchanged.Keypad Access SecurityThis feature prevents accidental or unauthorized changes to settings from the SC200 keypad.All access to change an SC200's settings will be lost if:All communications are disabled (see S3P Access on page 95 and HTTP/HTTPSAccess on page 96), andKeypad access is Read Only, or PIN Protected and the keypad access PIN is lost.The SC200 will continue to function, but no configuration changes can be made.Contact your Eaton dc product supplier or Eaton for advice (see Worldwide Supporton page 125).► To use DCTools/Web to enable/disable keypad accessIn DCTools/Web go to Communications > Front Panel.Set Access to:Unprotected - keypad access is allowed to view and change parameters, orRead Only - keypad access is allowed to view parameters only, orPIN Protected - keypad access is allowed to view and change parameters if the correct 4-digit number is typed in the Access PIN field. Otherwise, Read Only access is allowed.► To use the SC200 when access is set to PIN ProtectedAt the Main Screen press Menu. The Logon screen appears.If the Access PIN is not known then press Skip to use the SC200 with Read Only access.If the Access PIN is known:Use the Left and Right keys to access each digit position. Use the Up and Down keys tochange the digits.When the correct digits are entered, press Logon. Keypad access will return to PIN Protected mode when the display returns to the MainScreen.