Eaton SC200 Operation Handbook

Also see for SC200: Installation and operation guide Installation and operation guide

SC200 Handbook88 Copyright © 2007-2011 Eaton Corporation. All Rights Reserved.IPN 997-00012-50H November 2011► Diagnostics1 In DCTools/Web go to Configuration > Communications > Email Notifications.2 The result of the most recent SMTP operation affecting each recipient is shown on the rowcontaining the recipient's Email address. The last three digits represent the SMTP replycodes defined in RFC 821 and its extensions. A code of 250 indicates that the most recentemail was delivered successfully. The SC200 will set the result to 9999 if communicationwith the SMTP server has failed.Modbus-TCP CommunicationsModbus-TCP* Connections The SC200 only accepts one Modbus-TCP connection at a time, on the reserved Modbus-TCP portof 502. SC200 system controller PC/laptop with Building Management Systemusing Modbus-TCP. Communications network. Protocol: TCP/IPSC200 Setup1 Setup Ethernet Communications (see details on page 82).2 Set the following Modbus-TCP* parameters:Parameter Description Where to find:Modbus Access Set to Enabled. SC200: Settings > ModbusDCTools/Web:Configuration >Communications > RemoteAccess Protocols > ModbusAddress Set to 1 for Modbus-TCP. * The SC200 also supports Modbus-RTU via the RS232 serial port (XS1). For details requestApplication Note AN0107 from your Eaton dc product supplier.