SC300 OperationCopyright © 2007-2018 Eaton Corporation. All Rights Reserved.IPN 997-00012-03 B2 Issue B2 July 2018 17SC300 Identity InformationThe following identity information is stored in the SC300.Parameter Description Where to find:Serial Number The SC300 serial number (factory set). SC300: InfoWeb:Identity > SoftwareDCTools:Configuration > Identity >SoftwareSoftware Version(App Version)The version of the embeddedsoftware in the SC300 (factory set).If required, the following site specific information can be stored in the SC300 to assist sitemanagement.Parameter Description Where to find:SystemManufacturerThe manufacturer of the dc powersystem.Web: IdentityDCTools:Configuration > IdentitySystem Type The dc power system model number.System SerialNumberThe dc power system serial number.System Location Location of dc power system at thesite.Map Coordinates Longitude and latitude. When thesevalues are entered, a web browserwill show these coordinates on a map(using Google Maps).Site Name Name of the site.Site Address Address of the site.Site Building The building name.Site Room The equipment room name.Site Contact Contact details for the person incharge of the site.Site SupportContactDetails of the person supporting thisequipment.Site Notes Any notes relevant to site access,location or other matters.ConfigurationNameA name that can be entered for theconfiguration file.This name is automatically loaded if theuser selects a Generic System Type, orwhen a configuration file is loaded fromweb or DCTools.
