Eaton SystemStak DGM 3 40 Series Manual

EATON DGM**-3 40/41 Design E-VLST-BB001-E April 2015M-19MInstallation Dimensions in mm (inches)DGMFN-3-X-***(-***)-41DGMFN-3-Y-***(-***)-41DGMFN-3-Z-***-41Models with type W adjusterTo adjust valve setting, slacken off locknut and turn screw Re-tighten locknut after completing adjustment.APBTAPBTAPBTLine B or line P adjustment(according to model type)39 (1.54)76 (3)C max.45 (1.8)max.47,6(1.87)46(1.8)4 off “0” seals supplied for this interface4 holes through: Ø5,3 (0.21 dia)A max.4 ( 5 /32 ) A/F hex. socket40(1.57)3,5 (0.14) Ø3 (0.12 dia)E max.12,7 ( 1 /2 ) A/F hex. locknut .Torque to 25-30 Nm (18-22 lbf ft)Line A or line T adjustment(according to model type)B max.D max.47 (1.85)max.E max.56 (2.2)max.Ø32 (1.26 dia)M4 locking screw2 ( 5 /64 ) A/F hex. socketType H adjuster  Turn clockwise to decrease flow (increase restriction);counter-clockwise to increase flow (reduce restriction).Model A B C D EDGMFN-3-X-A*W-41 121 (4.76) – – – 16,75 (0.7)DGMFN-3-X-A*W-B*W-41 – – 167 (6.6) – 16,75 (0.7)DGMFN-3-X-B*W-41 – 122 (4.8) – – 16,75 (0.7)DGMFN-3-Y-A*W-41 121 (4.76) – – – 23,25 (0.9)DGMFN-3-Y-A*W-B*W-41 – – 167 (6.6) – 23,25 (0.9)DGMFN-3-Y-B*W-41 – 122 (4.8) – – 23,25 (0.9)DGMFN-3-Z-P*W-41 – – – 123 (4.8) 16,75 (0.7)DGMFN-3-Z-T*W-41 – – – 123 (4.8) 23,25 (0.9)