Eaton SystemStak DGM 3 40 Series Manual

EATON DGM**-5 30 Design E-VLVI-SS001-E1 October 2015N-35N56,8 (2.24) “H” models(max. ext.)2 (5/64”)Hex key requiredfor adjustment82,9 (3.26)“K” models 45(1.77)For keyremovalmax. ext.54,1 (2.13) “H” models(max. ext.)Hex key requiredfor adjustment80,1 (3.15)“K” models 45(1.77)For keyremovalmax. ext.C “H” models(max. ext.)Hex keyrequired foradjustmentD“K” models 45(1.77)For keyremovalmax. ext.74,4 (2.93)Hex key requiredfor adjustmentH – Handknob C – Cap over screwW – Screw with locknut65,6 (2.58) 68,5 (2.70)13 (1/2”)Wrench sizeHex key4 (5/32)2 (5/64”)2 (5/64”)2 (5/64”)13 (1/2”)Wrench sizeKnob AdjustersDGMCDGMC2 (dual type)DGMR1DGMX2DGMC2(crossport type)DGMFNDGMRAdjustment of valve setting is only possible while key isinserted and turned to engage driving pin. When key isremoved, adjuster knob can be freely spun and does notengage with setting mechanism.Adjustment of valve setting is only possible while key isinserted and turned to engage driving pin. When key isremoved, adjuster knob can be freely spun and does notengage with setting mechanism.Adjustment of valve setting is only possible while key isinserted and turned to engage driving pin. When key isremoved, adjuster knob can be freely spun and does notengage with setting mechanism.Model C DDGMFN-5-X-P 68,9 (2.37) 95 (3.74)DGMFN-5-Y-A 61,9 (2.44) 88 (3.46)