Eaton SystemStak DGM 3 40 Series Manual

EATON DGM**-5 30 Design E-VLVI-SS001-E1 October 2015N-30NFunctional SymbolsAPPTDGMPC-5-BA*-30BA 1B 1TAPPTDGMPC-5-AB*-30BA 1B 1T APPTDGMPC-5-AB*-BA*-30BA 1B 1TBasic CharacteristicsMaximum flow 120 l/min (32 USgpm)Maximum operating pressure 315 bar (4500 psi)Leakage @ 50°C (120°F) Poppet @ 35 bar (500 psi)Standard models 0.3 ml/min.“D” models 1.0 ml/min.Piston @315 bar (4500 psi) 20°C to 50°C (70 to 120°F)Operating temperature 20°C to 50°C (70° to 120°F)Weights 2,9 kg (6.4 lbs)Operating DataPerformance DataDGMPC Pressure DropThe curves below show pressure drop through eachfunctional flow path in the valve. The total insertion loss forthe valve must be calculated by summing the losses throughthe four applicable flow paths.Model Type Curve NumberP T A BDGMPC-5-(D)-AB*-30 1 2 - 5  • 3 - -4DGMPC-5-(D)-BA*-30 1 2 • 3 - - - 5 4DGMPC-5-(D)-AB*-(D)-BA*-30 1 2 - 5  - 5 • Flow toward actuator without check – single check only Flow from actuator without check – single check only Use K, M, or N cracking pressure curve as applicableMKNPressure drop barPressure drop psi6400Flow l/minFlow USgpm20 40 60 80 100 1205 10 15 20 25 302810161412182022245010015020025030012345