Falcon 90 Professional Instructions For Use And Installation

Also see for 90 toledo: User guide

Contents

English30Moving your cookerSwitch off the electricity supply.The cooker is heavy, two people maybe required to move it. There are twolevelling rollers at the back and alsotwo screw down levelling feet at thefront.Open the grill door and right handoven door so that you can get a goodgrip on the bottom of the fascia panelas you move the oven. Lift the front ofthe cooker slightly and pull forward.Do not move the oven by pulling thedoor handles or knobs.Move the oven a bit at a time, check-ing behind it to make sure the gashose is not caught. Make sure bothelectricity and gas cables have suffi-cient slack to move the cooker for-ward as you go along.If a stability chain is fitted, release itas you ease the cooker out. Don’t for-get to refit it when you replace thecooker.When you replace the cooker, againcheck behind to make sure that theelectricity and gas cables are notcaught or trapped.TroubleshootingSteam is coming from theovenWhen cooking foods with a high wa-ter content (e.g. oven chips) theremay be some steam visible at therear grille. Take care when openingthe oven door, as there may be a mo-mentary puff of steam when the ovendoor is opened. Stand well back andallow any steam to disperse.The oven fan is noisyThe note of the oven fan may changeas the oven heats up - this is perfectlynormal.The knobs get hot when Iuse the oven or the grill,can I avoid this?Yes, this is caused by heat risingfrom the oven or the grill, and heatingthem up. Don’t leave the oven dooropen. Make sure that the grill pan ispushed right back to the ‘back stop’when grilling.If there is an installationproblem and I don’t getmy original installer tocome back to fix it whopays?You do. Service organisations willcharge for their call outs if they arecorrecting work carried out by youroriginal installer. It’s in your interest totrack down your original installer.Current Operated EarthLeakage BreakersWhere the cooker installation is pro-tected by a 30 milliamp sensitivity re-sidual current device (RCD), the com-bined use of your cooker and otherdomestic appliances may occasion-ally cause nuisance tripping. In theseinstances the cooker circuit may needto be protected by fitting 100mA de-vice. This work should be carried outby a qualified electrician.Food is cooking tooslowly, too quickly, orburningCooking times may differ from yourprevious oven. Individual tastes mayrequire the temperature to be alteredeither way, to get the results youwant. Try cooking at a higher or lowertemperature setting.The oven is not cookingevenlyDo not use a tin or tray larger than thebaking tray we supply (320mm x305mm).If you are cooking a large item, beprepared to turn it round during cook-ing.If two shelves are used, check thatspace has been left for the heat to cir-culate. When the baking tray is putinto the oven, make sure it is placedcentrally on the shelf.Check that the door seal is not dam-aged and that the door catch adjustedso that the door is held firmly againstthe seal.NB the seal on the left hand ovendoor is intended to have a gap at thebottom of the doorA dish of water when placed on theshelf should be the same depth allover. (For example, if it is deeper atthe back, then the back of the cookershould be raised up or the front low-ered). If the cooker is not level ar-range for your supplier to level it foryou.Oven not coming on whenturned on manuallyIs the power on? Is the clock illumi-nated? If not there may be somethingwrong with the power supply. Is thecooker supply on at the isolatorswitch? Is the clock flashing 0.00? Ifso set it to the correct time of day.Has the Timer been set to AUTO bymistake? If AUTO is showing on theclock display, press the ‘cook period’button and reduce any set cookingtime showing to 0.00, with the (+) and(-) buttons. Press the ( ) buttontwice. If this does not solve the prob-lem contact a service person.Oven not coming on whenautomatic cookingTimer set correctly but oven knob leftOFF by mistake?Oven temperature gettinghotter as the cooker getsolderIf turning the knob down has notworked or only worked for a shorttime then you may need a new ther-mostat. This should be fitted by aservice person.