1 2 5 3 0 / 1 2 5 4 0 O W N E R ' S M A N U A LP/N 447203 Issue I II-9GENERAL SPECIFICATIONSOperating specifications for the 12530/12540 are as follows:Environmental• Operating temperature32 - 120°F (0 - 49°C)• Relative humidityUp to 85% @ 86°F (30°C)Primary Supply• Primary Input Voltage:120 VAC (50/60 Hz) nominal (12530/12540-120)240 VAC (50/60 Hz) nominal (12530/12540-240)• Maximum primary input current:3.0A at 120 VAC1.5A at 240 VACSecondary and Trouble Power Supply• 24 volt lead-acid battery set:• Maximum Charge Voltage: 28.0 VDC• Maximum Charge Current: 2.75 A• Maximum Input Current: 4.66A• Battery capacity: 7-38 A.H. (over 10 A.H. requires separate enclosure)Auxiliary Power Outputs• Current:0.9 amp maximum for remote annunciators0.9 amp maximum for auxiliary power outputs, DACT power and option boards• Non-Resettable Power OutputsPower limitedVoltage: 24 VDC nominalRipple: 1.5 VAC maximum• Resettable Power OutputPower limitedVoltage: 24 VDC nominalRipple: 1.5 VAC maximumAddressable Device Circuits• Power limited• Supervised• Voltage: 24 VDC nominal• Maximum Current (shorted): 0.25A• Maximum wire loop resistance: 20 ohms/lineFaraday Addressable Devices:• Two Style 4 or 6 circuits• Expandable to four Style 4 or 6 circuits with optional boards• 60 detectors and modules max.System Sensor Devices:• Two Style 4, 6 or 7 circuits• Expandable to four Style 4, 6 or 7 circuits with optional boards• 99 sensors (smoke, heat) max• 99 monitor and control modules max.
