Faraday MPC-1500 Plus Owner's Manual
                                                                                                                               | |
Contents
| 
1 2 5 3 0 / 1 2 5 4 0 O W N E R ' S M A N U A LP/N 447203 Issue I III-612506 OPERATING INSTRUCTIONSAlarm OperationIn case of alarm, the System Alarm LED flashes, LCD will display alarm conditions and the buzzersounds. Local audible and visual signals and remote alarm signals operate.When an alarm occurs, proceed according to the established emergency plan. Assure that all personnelare accounted for, and notify the Fire Department to advise of the alarm and/or verify that an automaticsignal has been received at the Fire Department.Authorized Personnel OnlyTo silence the alarm:To silence the notification appliances after evacuation, where permitted, operate the ButtonEnable keyswitch and press the Alarm Silence switch. The notification appliances and buzzerwill be silenced, and LED indications will change from flashing to continuous. The Alarm SilencedLED will be lit.Note: Do not reset the panel until the alarm has been cleared.Warning: Alarm silence inhibit (if set) prevents the alarm from being silenced for apredetermined time.To reset panel after alarm:When the alarm condition is corrected, return the panel to normal standby operation by using theButton Enable keyswitch and then pressing the System Reset switch.Trouble OperationTrouble is indicated by:System Trouble LED flashesLCD will display trouble conditionsBuzzer soundsTo silence the trouble buzzer:Operate the Button Enable keyswitch and press the Trouble Silence switch. The SystemTrouble LED changes to continuous display. When the trouble condition has been cleared, youmay need to reset the panel to restore to a normal standby condition.Warning: Leaving the panel in a trouble condition may cause a fire alarm condition not toinitiate a fire alarm sequenceNormal Standby ConditionThe green Power On LED will be lit and no other indicators on.For service, contact: ___________________________________________Telephone Number: ___________________________________________Frame these instructions and mount them near the annunciator for operator reference. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine