Chapter 5. Communication130 AT600 User’s ManualCommand 206 (0xCE): Write Fluid Information (cont.)Command 208 (0xD0): Read Calibration ConfigurationThis command is to read Calibration Configuration.Table 134: Command-Specific Response CodesCode Class Description0 Success No Command-Specific Errors1 Undefined2 Error Invalid Selection3-4 Undefined5 Error Too Few Data Bytes Received6 Error Device-Specific Command Error7 Error In Write Protect Mode8-15 Undefined16 Error Access Restricted17-127 UndefinedTable 135: Request Data Bytes for Read Calibration ConfigurationByte Format DescriptionNoneTable 136: Response Data Bytes for Read Calibration ConfigurationByte Format Description0 Unsigned-8 Reynolds correction1 Unsigned-8 Active MultiK Enable2 Unsigned-8 KFactor Type:0: Velocity, 1: Reynolds3 – 6 Float Static KFactor7 Unsigned-8 KFactor Points8 - 11 Float Kinematic Viscosity
