AT600 User’s Manual 15Chapter 2. Installation2.5 Installing C-RS Fixture and Transducer System2.5.1 Installation Guide for C-RS transducerRefer to GE document 916-077, the C-RS Installation Guide, for C-RS transducer installation onto the pipe (Section 6,Installing General Clamping Fixture).2.5.2 Install Cable Adaptor for C-RS transducer and AT6 cableTo match the BNC type connector on the C-RS transducer with the SMA type connector on the AT6 cable, one BNC toSMA adaptor is needed for C-RS transducer cabling. See Figure 21 below for adaptor installation.Figure 21: Install Cable Adaptor for C-RS TransducerAT6 Cable with SMA PlugBNC to SMA AdaptorC-RS Transducer
