AT600 User’s Manual 135Chapter 5. CommunicationCommand 218 (0xDA): Write Reynolds KFactor TableThis command is to write Reynolds KFactor table.Table 150: Request Data Bytes for Write Reynolds KFactor TableByte Format Description0 Unsigned-8 Reynolds KFactor Index ( 1 - 6 )1 – 4 Float Reynolds Value5 – 8 Float Reynolds KV Value;Table 151: Response Data Bytes for Write Reynolds KFactor TableByte Format Description0 Unsigned-8 Reynolds KFactor Index ( 1 - 6 )1 – 4 Float Reynolds Value5 – 8 Float Reynolds KV Value;Table 152: Command-Specific Response Codes for Write Reynolds KFactor TableCode Class Description0 Success No Command-Specific Errors1 Undefined2 Error Invalid Selection3-4 Undefined5 Error Too Few Data Bytes Received6 Error Device-Specific Command Error7 Error In Write Protect Mode8-15 Undefined16 Error Access Restricted17-127 Undefined
