Chapter 3. Initial Setup and Programming60 AT600 User’s Manual3.7.2b Setting Pipe Material (cont.)3.7.2c Setting the LiningPress [] again, and a screen similar to the following appears.Note: The units that appear will be the units selected in Units Setting on page28.Use the [] or [] arrow key to select the digit to be changed, use the [] or[] arrow keys to change the Pipe SOS value and press []. Press [] to returnto the previous display.Press [] twice to return to the Pipe menu.In the Pipe menu, select Lining and press [√]. The following screen appears.If there is no lining, select No and press [√] to return to the previous screen.If there is a lining, select Yes and press [√] twice. A screen similar to thefollowing appears.To set the lining thickness, select it and press []. A screen similar to thefollowing appears.Pipe SOSPipe SOS2400.000 m/sPipe SOSUNIT: m/s2400.000]MOVE]UNDO [ ]SAVE ]]]MODF[PipePipe IDWall ThicknessPipe MaterialLiningLiningNoYesLiningLining ThicknessLining Material
