Chapter 3. Initial Setup and Programming40 AT600 User’s Manual3.6 Inputs/Outputs3.6.1 Programming the Analog Output MenuTo access the Analog Output menu, on the initial screen, highlight the locksymbol and press [√]. The following screen appears.Select Program and press [√]. The following screen appears.To enter the password, use the [] or [] arrow key to select each digit to bechanged, use the [] or [] arrow keys to change the value of each digit, andpress []. The following screen appears.In the User Preference menu, select Units Setting and press the right arrow key.A screen similar to the following appears.Select the desired Output number with the [] or [] arrow keys, and press[] to enter the relevant configuration menu.Velocitym/s0.0DisplayDisplay FormatProgramProgram ReviewKeypad LockoutEnter the password9999]MOVE]UNDO [ ]SAVE ]]] ]MODFUser PreferenceSettingsUnits SettingDensityPasswordInput/OutputAnalog Output ADigital Output BDigital Output CModbus/Service Port
