AquaTrans™ AT600 User’s Manual 35Chapter 4. Initial Setup and Programming4.3.3 Changing the Measurement Type or Units for the Totalizer ScreensThe totalizer screen opens similar to Figure 32 below.Figure 32: The Totalizer ScreenTo change the number of decimal places in the value displayed on a totalizer screen, proceed as follows:From the display screen, press either the [] or [] keys until the valueis highlighted.After the value is highlighted, press [] to open the Display/Decimal option.Use the [] and [] keys to scroll to the desired number of decimalplaces. (Available options include 0, 1, 2, 3, 4, and Sci (Scientific Notation).Press [] to select the value, and then press [] again to confirm theselection or [] to cancel the selection.Total m^3Forward 0.000e+00Reverse 0.000e+00TotalizerReset TotalizerError CodeValuesMeasurement TypeStart/Stop TotalizerTotalizer UnitsTOTAL m^3Forward 0.000e+00Reverse 0.000e+00Total m^3Forward 0.000e+00Reverse 0.000e+00Display/Decimal234Sci
