AquaTrans™ AT600 User’s Manual 71Chapter 4. Initial Setup and Programming4.7.4.2 Selecting the Pipe MaterialIn the Pipe menu, select Pipe Material and press [√]. The following screenopens.Note: Table 3 below lists the available pre-programmed pipe materials.Table 3: Pre-programmed Pipe MaterialsName Pipe MaterialCARBON STEEL Carbon SteelSS STEEL Stainless SteelDUCT IRON Duct IronCAST IRON Cast IronCu CuprumAl AluminumBRASS Brass30%Ni 30% Nickel Copper Alloy10%Ni 10% Nickel Copper AlloyPYREX GLASS Pyrex GlassFLINT GLASS Flint GlassCROWN GLASS Crown GlassNYLON PLSTC Nylon PlasticPOLYE PLSTC PolyethylenePOLYP PLSTC PolypropylenePVC PLSTC Polyvinyl chlorideACRYL PLSTC Acrylic PlasticSelect the appropriate pipe material from the list, and press [] to returnto the previous screen. If your pipe material is not listed, select Other andpress [√] twice. A screen similar to the following opens.PipePipe ODPipe IDWall ThicknessPipe MaterialPipe MaterialCuNiGlassPlasticOther
